Putzmeister shares Value Retention Tips for concrete equipment

While many of the tips shared here are common across concrete equipment, the checklist has been made with Putzmeister concrete equipment in mind.

• Clean/remove concrete from all machine components.
• Drain water out of water box/tank and keep it empty.
• It is important to regularly grease all greasing points. You should also apply grease on all exposed hydraulic cylinder rods.
• Drain water from the hydraulic tank once every five days.
• Run the engine for 15 minutes every five days. This will keep the battery from draining.
• Check all operations and functions.

Truck-mounted concrete pump:

• Clean/remove concrete from all machine components.
• Drain water out of water box/tank and keep it empty.
• Store remote and cable inside the cabinet, away from moisture.
• Disengage the hand break of the truck chassis, use tyre/wheel stoppers instead.
• It is important to regularly grease all greasing points. You should also apply grease on all exposed hydraulic cylinder rods including the third arm boom cylinder rod.
• Drain water from the hydraulic tank once every five days.
• Run the engine for 15 minutes every five days. This will keep the battery from draining.
• Check all operations and functions.

Batching plant

• Ensure the mixer is free of all concrete.
• Regularly grease all greasing points, including points in the mixer shaft.
• Apply grease to all open pneumatic cylinder rods.
• Keep cement screw free of cement to prevent it from setting inside the screw.
• Protect your wire rope by applying Cardium Compound